Everbuild Gator Glue Adhesive 500ml

GATOR GLUE is the adhesive with real bite. Once applied it penetrates and expands slightly on cure, really 'sinking its teeth' into both substrates to form a virtually indestructible bond.
GATOR GLUE gives exceptionally high bond strength and is resistant to most chemicals. May be used internally or externally. Put simply, it is the essential glue for trade, household or hobby use.
Benefits:-
Fast setting, initial set in 30 minutes (full cure 24 hours)
Exceptional bond strength to wood and most common building surfaces.
Internal and external use - excellent weathering and aging properties.
Products foam slightly on application to fill small gaps and increase overall bond strength.
Excellent chemical resistance.
Areas For Use:-
General wood jointing and construction
Bonds to wood, metal, stone, ceramics etc.
Furniture manufacture
Boat building
As a high quality insulation adhesive for foam/glasswool/fibre boarding
Limitations:-
At least one of the surfaces to be bonded must be porous.
Not suitable for polyethylene, polypropylene, Teflon or Nylon.
Surfaces may be damp, but moisture content of wood must not exceed 30%w/w.
As product expands slightly on curing, do not use on sheet laminate. Use STICK 2 CONTACT ADHESIVE.
Only apply between + 5 and + 30 degrees C.
Ensure surfaces are always clamped during use.
Setting times will be increased at low temperatures and low humidity.

Colour Brown
Contents: 100% prepolymers and catalyst (solvent free)
Solids: 100% (solvent free)
Viscosity: 200 x103 mPa.s (bfld RVT sp7 5rpm) (gel)
Coverage: 400g/m², or 10 linear meters per tube (approx)
Initial Set Time: 30 miniutes depending on product
Flash Point:N/A
Cleaner: Everbuild Gun Foam Cleaner or acetone BEFORE curing. After cure, use mechanical abrasion.