Room-in-Roof Roll - 

Room-in-Roof Roll is a premium solution intended for the insulation of pitched roofs at rafter level

Description      

Room-in-Roof Roll provides thermal and acoustic insulation combined with unbeatable Euroclass A1 fire performance.

The foil facing on Room-in-Roof Roll is wider than the insulation enabling it to be stapled to the rafters to create a vapour control layer (vcl).

Standards

Handling and Storage

Room-in-Roof Roll is easy to handle and install, being lightweight and easily cut to size. It is supplied in polythene packs which are designed for short term protection only.

For longer term protection on site, the product should either be stored indoors, or under cover and off the ground. Installation instructions are on every pack. Room-in-Roof Roll should not be left permanently exposed to the elements.

Application

Room-in-Roof Roll is used for insulating between the rafters of pitched roofs in both new build and existing buildings. It is easy to cut and friction fit between rafters.

Permanence

Room-in-Roof Roll is odourless, rot proof, non-hygroscopic, does not sustain vermin and will not encourage the growth of fungi, mould or bacteria.

Thermal Performance

Room-in-Roof Roll 32 has a thermal conductivity of 0.032 W/mK.

Room-in-Roof Roll 37 has a thermal conductivity of 0.037 W/mK.

Fire performance

Room-in-Roof Roll is classified as Euroclass A1 to BS EN ISO 13501-1.

Vapour Resistivity

Room-in-Roof Roll is foil-faced with a 50mm flange at each side of the roll, when the flange is stapled to the rafters it provides a vapour control layer (vcl).

Acoustic Performance

Room-in-Roof Roll has excellent sound absorption characteristics.

• Very high thermal performance

• Combines thermal and acoustic performance

• Quick and easy installation

• Friction fitting allows rafter spacing to be completely filled, thus eliminating air gap