Calder Aluminium Soaker 6'' x 6'' Bent 3'' x 3''

Calder Aluminium Soaker 6'' x 6'' Bent 3'' x 3''

The Calder Aluminium Soaker 6'' x 6'' Bent 3'' x 3'' is a cost effective alternative to lead which is both lightweight and easy to install. Highly durable, the soakers will not discolour overtime nor will they warp or crack. The Calder Aluminium Soaker 6'' x 6'' Bent 3'' x 3'' is for the purpose of forming a pitched roof against an existing wall and is suitable for both slate and plain tile roofs. The product has a thickness of 0.5mm and a bend of 3”x3”. The bend, pre-made to a 90º angle, forms a waterproof joint and its protected cover flash, prevents moisture from entering. Due to demand the Calder Aluminium Soaker 6'' x 6'' Bent 3'' x 3'' is now available individually to suit your requirements.

Please note it is advised that those buildings classed as being in a ‘marine atmosphere’ (presence of salt water) should not use aluminium soakers due to salt water accelerating corrosion on materials made from aluminium.  

Aluminium soakers are a lightweight and durable alternative to lead, and they are used when forming a pitched roof against an existing wall. These, Calder Aluminium soakers are pre-fabricated to a 90º angle, and are inserted between successive courses to make a waterproof joint.

These products are now supplied individually.

Properties:

• Length : 6" (150mm)
• Width : 6" (150mm)
• Bent : 3" x 3" (75mm x 75mm)
• Thickness : 0.5mm