Warmup Foil Underfloor Heating Kit
Electric underfloor heating system for laminate, carpet, vinyl, engineered wood and other floating floor finishes.
Warmup 140w Foil Heater
The Warmup Foil Heater is an electric underfloor heating system for laminate, engineered wood and other floating floor finishes.
The Foil heater is fitted between the insulating layer and the floating floor deck, adding negligible height to the installation.
Glued parquet flooring, carpets, vinyls and other resilient floor finishes can be laid over the Warmup Foil Heater by using our Dual Overlay system to create a thin floating floor deck.
If homeowners wish to refurbish their rooms in the future, the floating floor finish installed over the foil heater can be easily lifted and replaced with a new finish if desired.
The Foil heater is made up of a fibre reinforced foil wrapped around a thin multi strand, dual core heating cable that is insulated with an advanced fluoropolymer. The foil provides a continuous earth layer within the floor construction whilst diffusing the heat away from the heating cable.
Features:
- Foil layer acts a continuous earth layer within the floor construction whilst also diffusing the heat evenly.
- Installed directly under the floor finish; no self levelling required.
- Ideal for regular shaped rooms, where the 0.5m wide mats can be rolled out across the floor in parallel runs.
- Ideal for heating under laminate, engineered wood and other floating floor finishes.
- BEAB Approved and CE marked meeting the highest safety standards for ultimate piece of mind.
- 15 Year Warranty & SafetyNet Installation Guarantee.
Tech Specs:
- OPERATING VOLTAGE: 220 - 240v: 50Hz
- IP RATING: IPX7
- WIDTH: 500mm
- MAT THICKNESS: 3mm
- CABLE THICKNESS: 1.8mm
- OUTPUT RATING: 140W/m²
- INSULATION: ETFE
- MIN. INSTALLATION TEMP: 5°C
- CONNECTION: 3m LONG “COLDTAIL” CONNECTION
Product Brand | Warmup |
---|
Delivery charges will depend on the contents of your order and will be calculated at checkout.