Warmup Manual Thermostat Controller
No need to set-up a programme, the Warmup MSTAT is simple and intuitive, allowing you to set your comfort temperature in seconds with a twist of a dial.
Warmup Manual Thermostat Controller
The Warmup MSTAT is a manual thermostat suitable for use with electric underfloor, hydronic underfloor and central heating systems. It has a clean look with an easy to use temperature dial. Simply set your desired temperature to switch the heating on as and when you need it.
Features:
- Concealed heating indicator.
- Adjustable floor temperature limit.
- Floor and air sensors ensure precise control.
- Sensors can be set as; Air, floor or Air with a floor limit.
- Automatically enters ‘safe mode’ if sensor failure detected.
- CE marked for ultimate peace of mind.
- 3yr Warranty.
Tech Specs:
- INPUT VOLTAGE: 230V ± 10% at 50Hz
- MAX LOAD: 16A (3680W)
- DIMENSIONS: (H/W/D): 86 x 86 x 50 mm
- TEMPERATURE RANGE: +5°C to +35°C
- FLOOR LIMIT TEMPERATURE: +27°C
- SAFE MODE: 2 MINUTES ON, 2 MINUTES OFF, 50% DUTY
- SENSORS: Air & FLOOR
- SENSOR TYPE: NTC5K 3m LONG (CAN BE EXTENDED TO 50m)
- HEATING INDICATION: CONCEALED LED
- IP RATING: IP40
- INSULATION CLASS: II
- Er-P CLASS: I
- INSTALLATION DEPTH: 35mm BACK BOX
- COMPATIBILITY: ELECTRIC UNDERFLOOR, HYDRONIC UNDERFLOOR & CENTRAL HEATING SYSTEMS
- STANDARDS: EN60730-1 & EN60730-2-9
Product Brand | Warmup |
---|
Delivery charges will depend on the contents of your order and will be calculated at checkout.