Harcon In-line Mini Castellated Roof Tile Vent - Grey

SKU
RV10K/G042/GY03
£17.58 Inc. VAT
Harcon In-line Mini Castellated Roof Tile Vent - Grey
+
Delivery estimate 7 Working Days more details
Details

Harcon In-line Mini Castellated Roof Tile Vent - Grey

The Harcon In-line Mini Castellated Roof Tile Vent - Grey incorporates a discreet cassette system that keeps water above the roofline without allowing any egress of water, even though the vent sits almost flush with the roof. This allows rainwater to fall through the grid where it flows through an internal channel before emerging back on to the roof tile and flowing down the roof. 

To avoid the felt tearing which can occur with rectangular spigots the Harcon In-line Mini Castellated Roof Tile Vent - Grey comes equipped with a factory fitted neat felt sleeve. 

Suitable for roof pitches in excess of twenty degrees and providing ventilation for an area of ten thousand square millimetres, the Harcon In-line Mini Castellated Roof Tile Vent - Grey is remarkably effective and its thoughtful design means it is barely visible from ground level, thus ensuring an obtrusive tile vent does not spoil the visual impact of the roofline.

Features

  • Provides 10,000mm2 of ventilation
  • Incorporates barriers to prevent water ingress
  • Tile matching service available
  • One felt sleeve (FW1) is supplied with each unit

Installation: Cowl or Roofline Vents for Tile Roof

  1. Complete roofing to one course below the position for the tile vent.
  2. Hold vent in position as centrally as possible between the rafters and mark where the vent spigot touches the underlay. 
  3. Cut underlay in a cross, fold up and back.
  4. Insert felt weir, if using, under batten above opening, positioning it centrally above the hole.
  5. Nail felt weir to the batten.
  6. Nail felt over the battens.

Sucessfully
added

Basket: ( items)

Go to checkout