M8 x 100mm Hex Head Atlas Bolt ZYP (Box of 100)
M8 x 100mm Hex Head Atlas Bolt ZYP (Box of 100)
M8 x 100mm Hex Head Atlas Bolt ZYP (Box of 100)
Samac Hex Head Atlas Bolts
Atlas Bolts have a dual thread which ensures correct alignment when fitting, and can be completely removed.
The Samac Hex Head Atlas Bolts ZYP M8 x 100mm - Box of 100 will securely keep the surfaces you require together. Made from high tensile boron steel, these bolts are incredibly strong preventing any risk of movement. Furthermore, this also ensures it can drill through substrates such as concrete, brick, timber, concrete block, marble and stone.
The Samac Hex Head Atlas Bolts ZYP M8 x 100mm - Box of 100, provides you with many bolts that are fast and easy to install but also can be removed with little effort.
Also, it includes ten sharp thread forming teeth maximising its strength and ability to perform its function while also designed with a dual threat to make sure any alignment is perfect. Therefore, to purchase these amazing quality and designed bolts, order the Samac Hex Head Atlas Bolts ZYP M8 x 100mm - Box of 100 from us today.
Features & Benefits:
- Manufactured from high tensile boron steel.
- Fast and simple installation.
- Fully removable.
- High loads with low expansion forces - an effective alternative to chemical anchors.
- Suitable for close to edge fixing.
- 10 sharp thread forming teeth.
- Available with 3 different screw heads: Countersunk, Hex Flange and Hex.
- Dual thread ensures correct alignment.
- Suitable for a wide range of substrates; from timber to marble.
- Tensile strength of 800N/mm2 after heat treatment.
Please note, to achieve the published tension and shear loads, Atlas Bolts should be installed at least 10x the anchor diameter between each bolt and 10x the anchor diameter from the edge of the base material.
Product Brand | Samac Fixings |
---|
Delivery charges will depend on the contents of your order and will be calculated at checkout.