Warmline PIR Insulated Plasterboard 1.2m x 2.4m - All Sizes
SKU
warmline29*
Special Price
£38.70
Regular Price
£39.00
Delivery Zone | Locations |
---|---|
1 | London, Manchester, Liverpool, Bolton, Sheffield, Leeds, Surrounding Areas |
2 | All Other Locations |
- ✅ Achieves The Same U-Value As Celotex PL4000
- ✅ Thermal Conductivity Of 0.022
- ✅ Built-In Vapour Barrier
Delivery: Estimated at 3 - 5 Working Days more details
Only %1 left
Product Information
Polyisocyanurate Foam Bonded to Plasterboard
Benefits
- All thicknesses readily available
- Simple solution to upgrading walls and roofs
- Quick and easy to install
- Can be used for both newbuild and refurb
- A simple way to meet building regulations
- Cost effective return
Fixing instructions for Dot and dab
- For bonding Warmline range to a wall use a proprietary gypsum based adhesive.
- Please follow the manufacturers instructions. As per manufacturers recommendations apply a continuous ribbon of adhesive around any openings.
- Apply 3 vertical rows of adhesive dabs to the walls at 300mm centres. Also ensure that there is a continuous bead at the bottom and top.
- After the adhesive has set fix a minimum of 2 insulation anchors through the board into the wall. They must go into the masonry by a minimum of 30mm.
Fixing instructions for mechanical fixing
- Fix to the wall treated batons 50mm x 25mm at a maximum of 600mm centres. Also fit horizontal batons at both floor and ceiling level.
- Then fit the warmline board using drywall screws at 150mm centres. Always ensure that they penetrate the batons by 25mm.
- When installing boards to rafters fix them at right angles to the timbers. To ensure a solid finish bridging pieces are to be used in between the rafters.
More Information
Product Brand | Warmline |
---|
Delivery Information
Delivery charges will depend on the contents of your order and will be calculated at checkout.